Leisure Hobby: October 2013

Introduction

I am stocking up RC stuffs so as to provide more affordable & better quality products. Free to play if you happened to see me. Provides training on how to play remote control toys & models and after sales service like upgrading, modifying, repair and parts replacement for all items. Most important of all add a little fun and laughter in daily life ! If there is anything you need and can't find it here please let me know as my supplier has a wide range of products and i am only bringing in some.

Thursday, October 31, 2013

Glues & Adhesives - TL-242 Thread Locker

$6.50SGD

TL-242 Thread Locker & Sealant Medium Strength

Easy removal, used for Fixing and sealing of threaded fastener size M6~M20
50 ml

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=10959&aff=1174206

Glues & Adhesives - 30min Epoxy Glue

$6.40SGD

HobbyKing 30min Epoxy Glue

30 Minute A/B Epoxy Glue.
A very high quality clear setting epoxy glue.
Excellent gap filling and bonding properties on almost all surfaces including delicate foam and hard to bond alloy.

An essential item for any building project and perfect for emergency in-field repairs!

28.4 g EA

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=12584&aff=1174206

Batteries - 1S 3.7V 260mAh 35~70C Li-Po

$5.50SGD

Turnigy nano-tech 260mAh 1S 35-70C Lipo Pack (QR Ladybird/Genius CP/Mini CP)

Spec:

Capacity: 260mAh

Voltage: 1S1P / 1 Cell / 3.7V

Discharge: 35C Constant / 70C Burst

Weight: 8g (including wire, plug & case)

Dimensions: 32x20x7mm

Discharge Plug: Walkera two pin

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24920&aff=1174206

Saturday, October 26, 2013

Batteries - 2S 7.4V 5700mAh 25~35C Saddle

$50.00SGD

ZIPPY Flightmax 5700mAh 2S3P 25C saddle pack

Spec:

Capacity: 2 x 5700mAh

Voltage: 2S3P / 6 Cell / 7.4v

Discharge: 25C Constant / 35C Burst

Weight: 154g Each (including wire, plug & case)

Dimensions: 69x46x31mm

Balance Plug: JST-XH

Discharge Plug: 4mm Bullet-Connector

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9967&aff=1174206

Batteries - 2S 2150mAh 20~30C Li-Po

$14.00SGD

Rhino 2150mAh 2S1P 20C Lipoly Pack

Capacity: 2150mAh
Constant discharge: 20C
Burst rate: 30C (15sec)
Configuration: 2S 7.4v
Pack size: 123x34x14mm
Weight: 132g
Discharge plug: XT60

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=7362&aff=1174206

Batteries - 2S 2150mAh 30~40C Li-Po

$22.00SGD
Rhino 2150mAh 2S 7.4v 30C Lipoly Pack

Capacity : 2150mAh
Constant discharge: 30C
Burst rate: 40C (15sec)
Configuration : 2S 7.4v
Pack size: 111x40x16mm
Weight : 129g

Discharge plug: XT60

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9316&aff=1174206

Brushless Inrunner Motor - XK3650 Sensored 3.5T

$49.50SGD

XK3650-10500KV Sensored Brushless Inrunner (3.5T)

Specs:
Max Amps: 80A
Max Volt: 7.4V
Rpm/V: 10500kv (3.5T)
Resistance: 0.0034 ohms
No-load Current: 9.5A(7.4V)
Dimension: 35.8mm x 52.5mm
Mounting hole depth: 4mm
Length of extend Shaft: 15mm
Shaft diameter: 3.175mm
Weight: 160g

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=17736&aff=1174206

Brushless Car ESC - 120A Short Course Truck ESC

$77.00SGD

Turnigy TrackStar 120A Brushless Short Course Truck ESC

Specification:
Cont. Current: 120A
Burst Current: 760A
Car Size: 1/10th~1/8th
Battery: 2~4 Cell Lipo
BEC: 6V / 5A Output
Motor Type: Sensorless Brushless
Size: 55 x 37.6 x 38.5mm
Weight: 87g
On/Off Switch: Yes
Reverse: Yes
Cooling Fan: Yes
Thermal Overload Protection: Yes
Fail Safe Mode: Yes
Motor Terminals: 3.5mm bullet

Programming Options: (can use stick programming or optional program card)
Brake/Reverse Type
Brake Amount
Reverse Amount
Punch Control
Drag Brake
Throttle Dead Band
Voltage Cutoff
Motor Timing
Motor Direction

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=22632&aff=1174206

Turnigy Heatsink - With Fan For 3650 Series

$14.60SGD
TURNIGY Heat Sink with Fan for 3650 series motors

Spec:

Inner diameter: 35.55mm

Dimentions: 51 x 55 x 63mm (whole unit)

Weight: 75g

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9131&aff=1174206

Friday, October 25, 2013

Servos - Turnigy TGY-4409MD 9.45kg / 0.11sec / 44g

$24.00SGD

Turnigy TGY-4409MD Metal Gear Digital Servo 9.45kg / 0.11sec / 44g

Model: TGY-4409MD
Dead band: 2us
Working frequency: 1520us / 330Hz
Operating voltage: 4.8~6.0V
Operating speed (4.8V): 0.13sec/60°
Operating speed (6.0V): 0.11sec/60°
Stall torque (4.8V): 8.65kg.cm (120.15 oz/in)
Stall torque (6.0V): 9.45kg.cm (130.88 oz/in)
Connector wire length: 265mm
Dimensions: 41x20.3x29.5mm
Weight: 44g

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24578&aff=1174206

Brushless Car ESC - Trackstar 1/10 Scale 100A Sensored

$82.80SGD

Turnigy TrackStar 100A 1/10th Scale Sensored Brushless Car ESC Car ESC

Specification:
Cont. Current: 100A
Burst Current: 200A
Car Size: 1/10th
Battery: 2-3 Cell Lipo
L-BEC: 5.0V / 2A Output
Motor Type: Sensored or Sensorless Brushless
Size: 40.5 x 37.5 x 24mm
Weight: 45g
Battery Plug: Required
On/Off Switch: Yes
Reverse: Yes
Thermal Overload Protection: Yes
Battery Terminals: 12AWG size
Motor Terminals: 12AWG size

Programming Options (Via Optional programming card)
Brake/Reverse type
Brake amount
Reverse amount
Punch Control
Drag Brake
Throttle Dead Band
Voltage Cut off
Motor Timing
NEW! Motor Reversing (v2.0 software)

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=27211&aff=1174206

Brushless Inrunner Motor - Trackstar 8.5T 4620KV

$54.00SGD

Turnigy TrackStar 8.5T Sensored Brushless Motor 4620KV

Features:
• Sensor-Based for Excellent Torque and Low-Speed Driveability
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Aluminum Motor Can
• High Purity Copper Windings
• Powerful Sintered Neodymium Magnets
• High Power Solder Tabs
• Removable/Replaceable Rotor
• Precision Engineered for Maximum Energy Conversion

*Note: Sensor cable included

Specs:
Can Size: 540
Turns: 8.5
RPM/v: 4620kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 50A
Max Watts: 390w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 174g

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=21959&aff=1174206

RC Cars - 1/10 Quanam Vandal 4WD

$SGD

1/10 Quanum Vandal 4WD Electric Racing Buggy
I am running this truck!

$122.00SGD (Kit Only)

Specs:
Length: 415mm
Width: 255mm
Height: 142mm
Wheelbase: 275/280mm
Gear Ratio: 11.2:1
Hex Hub Size: 12mm
Battery Tray Dimensions: 142x46x24mm (MAX battery size)

Included in box:1/10 Quanum Vandal 4WD Electric Racing Buggy (pre-assembled KIT)
17T pinion gear
Motor/servo mounting screws
Antenna tube
User manual

Required:
2CH transmitter and receiver
35~60A brushless ESC
3650 size brushless inrunner motor (3000~4000kv recommended)
Standard size high-torque servo (metal gear recommended)
2S 3000~4000MAH lipoly battery

Bundle with:
Tx & Rx
http://sg523.blogspot.sg/2013/09/rc-parts-hk-gt-2-tx-rx.html
ESC
http://sg523.blogspot.sg/2013/11/escs-motors-turnigy-brushless-esc-35a.html
Motor
http://sg523.blogspot.sg/2013/11/escs-motors-s3650-3980-brushless-3980kv.html
Servohttp://sg523.blogspot.sg/2013/10/servos-tgy-4409md-945kg-011sec-44g.html
Battery
http://sg523.blogspot.sg/2013/11/batteries-2s-74v-5600mah-50100c-li-po.html

My Build:
Tx & Rx
http://sg523.blogspot.sg/2013/09/rc-parts-hk-gt-2-tx-rx.html
ESC
http://sg523.blogspot.sg/2013/10/motors-escs-trackstar-110-scale-100a.html
Motor
http://sg523.blogspot.sg/2013/10/motors-escs-trackstar-85t-4620kv.html
Servo
http://sg523.blogspot.sg/2013/10/servos-tgy-4409md-945kg-011sec-44g.html
Battery
http://sg523.blogspot.sg/2013/09/rc-parts-2s-74v-5000mah-li-po.html

Truck Kit Only
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=27208&aff=1174206

Monday, October 21, 2013

RC Helicopters - HK450V2 3D Helicopter

$58.00SGD
HK450 CCPM 3D Helicopter Kit (Align T-rex Compat.) Ver. 2
Kit Only non-assembled

Friday, October 18, 2013

RC Helicopters - V922 RTF

$125.00SGD
New 3D stunt mini helicopter from WLToys !
Length: 238mm
Height: 93.7mm
Weight: 50g
Main Blade Length: 113mm
Blade Rotating Diameter: 249mm
Tail Blade Diameter: 45mm
Battery: 3.7V 300mAh 30C x2 included
Transmitter AAx4 batteries sold separately

Easy swapping between any modes!
Motor power comparable to Walkera Mini CP & mCP x
http://walkera.com/en/showgoods.php?id=471#txt2
A more affordable version of mCP x
http://www.bladehelis.com/Products/Default.aspx?ProdID=BLH3600#quickSpecs
Official Site
http://www.wlmodel.com/English/ShowProduct.aspx?pid=65

Thursday, October 17, 2013

RC Accessories - Car LED Light System

$25.00SGD

Hobbyking Scale Car LED Light system Advanced
Free Installation

Simple to install complete system powered from your RX power supply (4.8v~6v), all LED's and connectors are pre-soldered to quality twisted wires, the system comes complete with the following:

Programmable Control Box (47mmx30mmx12mm)

2 x 3mm Yellow LED

2 x 3mm Red LED

2 x 5mm Blue LED

6 x 5mm White LED

2 x Y-Lead

Switch Lead

LED Mounts

Adhesive Mount Pads

Instructions

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=19816&aff=1174206

Wednesday, October 16, 2013

RC Tanks - US-M41A3

$155.00SGD

US-M41A3 Walker BullDog Light RC Tank RTR w/ Airsoft, Tx, Sound Generator & smoke

US-M41A3 Walker BullDog Light RC Tank RTR w/ Airsoft, Tx, Sound Generator & smoke
This scale R/C replica is extremely well detailed and can travel very quickly and manage very steep hills thanks to it's All Driving Wheels Suspension System, making it excellent for battles and obstacle courses. This tank fires airsoft BB's for realistic game/competition style playing.

The tanks turret rotates 360 degrees, and the barrel can move 60 degrees. The tracks run on spring wheels just like the real tank to enable the US-M41A3 to clear obstacles easily.

Included with the US-M41A3 is a 7.2v NiCd pack, charger, radio system and all accessories.
You only need 8 AA batteries to be battle ready!

Spec:
Type: 1:16 US-M41A3 battle Tank
Firing Mechanism: Electric Airsoft
BB Size: 6mm
BB Capacity: 35
Weight: 3200g
Speed: Scale 70kmh
Length: 500mm
Width: 225mm
Height: 220mm

Features:
Realistic Sound Generator with adjustable volume control
Smoke Generator

Included:US-M41A3 Tank
Radio Controller
7.2v Ni-Cd battery pack
Instructions.
Accessories
BB pack
Smoke Oil

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=16000&aff=1174206

RC Tanks - German Tiger

$153.00SGD
German Tiger I RC Tank RTR w/ Airsoft/Smoke & Tx

German Tiger I RC Tank RTR w/ Airsoft/Smoke & Tx
This scale R/C replica is extremely well detailed and can travel very quickly, making it excellent for battles. This tank fires airsoft BB's and generates smoke for realistic game/competition style playing.

The tanks turret rotates 360 degrees, and the barrel can move 60 degrees. The tracks run on spring wheels just like the real tank to enable the Tiger I to clear obstacles easily.

There are many sound and feature adjustments and the radio can control all functions without the need for multiple buttons. This helps the user to quickly control the tank in battle situations.

Included with the Tiger I is a 7.2v NiCd pack, charger, radio system and all accessories.
You only need 8 AA batteries to be battle ready!

Spec:
Type: 1:16 Tiger I battle Tank.
Firing Mechanism: Electric Airsoft
BB Size: 6mm
BB Capacity: 35
Weight: 3200g
Speed: Scale 70kmh
Length: 520mm
Width: 240mm
Height: 200mm

Included:Tiger I Tank
Radio Controller
7.2v Ni-Cd battery pack
Instructions.
Accessories
BB pack
Smoke Oil

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=12670&aff=1174206

RC Tanks - German Panther

$118.00SGD

German Panther RC Tank RTR w/ Airsoft & Tx

The German Panther was fielded by Nazi Germany in World War II that served from mid-1943 to the end of the European war in 1945. It was intended as a counter to the T-34, and to replace the Panzer III and IV, though it served along with them as well as the heavier Tiger tanks until the end of the war. The Panther's excellent combination of firepower, mobility, and protection served as a benchmark for other nations' late war and immediate post-war tank designs and it is frequently regarded as one of the best tank designs of World War II.

This scale R/C replica is extremely well detailed and can travel very quickly, making it excellent for battles. This tank fires airsoft BB's for realistic game/competition style playing.

The tanks turret rotates 360 degrees, and the barrel can move 60 degrees. The tracks run on spring wheels just like the real tank to enable the German Panther to clear obstacles easily.

Included with the German Panther is a 7.2v NiCd pack, charger, radio system and all accessories.

You only need 8 AA batteries to be battle ready!

Spec:

Type: 1:16 German Panther battle Tank.

Firing Mechanism: Electric Airsoft

BB Size: 6mm

BB Capacity: 35

Weight: 3200g

Speed: Scale 70kmh

Length: 520mm

Width: 240mm

Height: 200mm

Included:German Panther & Radio Controller
7.2v Ni-Cd battery pack
Instructions.
Accessories
BB pack